Add speed to your laminating process with infrared preheating. The rapid heating and cooling of Glenro's InfraBoost preheaters makes them ideal for laminating applications.
|
- For highly insulative materials such as fibrous materials, foams
and other cellular, air trapping materials infrared preheating
puts the heat at the interface where it is required prior to the
plys joining at the laminator.
- Infrared preheating can also be used to partially sinter powder
adhesives prior to ply introduction.
- Below is a complete laminating line in which infrared preheating is a significant part of the process. In this production line, prior to entering the laminating machine, a foam substrate is conveyed under a powder coater that applies the adhesive. The coated foam then passes through an infrared preheater which partially sinters the powder adhesive and anchors it to the substrate.
|
|
|
|
|
Click photo for detailed view of infrared preheater
|
|
|
|
|
|
|