| |
Many
web and fabric drying applications require high velocity hot air impingement
systems for maximum efficiency. High velocity hot air impingement systems
project heated air at the web or fabric to break through the boundary
layer of air surrounding the product. The hot air transfers heat to the
coating, while the turbulence created by the air velocity removes vapor
from the coating surface and into the exhaust, which further facilitates
rapid drying.
Air nozzle design is key to dryer performance. We select the nozzle
configuration that gives the most effective heating and exhaust for
each application, while keeping cost considerations in mind. We also
design the nozzle velocity, the width of the nozzle openings, nozzle
spacing, and the distance of the nozzles from the product to suit your
application. Your processing requirements determine how we design the
system.
For more information on Glenro high velocity hot air impingement systems
click on the photos above or the links below.
| |
