Radplane® Series Ceramic Face Electric Infrared Heaters

Radplane Series Quartz Tube Electric Infrared Heaters

Glenro Radplane® Series 36, 37, 38, and 39 ceramic face infrared panel heaters emit a consistent heat pattern from edge to edge. The infrared heat is uniform and closely controlled allowing the user to mount the ceramic face electric infrared heaters just inches from the product's surface for efficient energy transfer.

These heaters can be used in a variety of applications including, but not limited to preheating, drying, curing, and sintering. Ceramic face infrared heaters can be used in close-packed configurations for manufacturing processes that require uniform product heating over large heated areas; like preheating automotive carpet backing prior to molding.

What distinguishes one series of heaters from another is its overall thickness or amount of insulation behind the heating element and its maximum operating watt density. Please follow the specification links below to learn more about our standard heater offerings.

Typical Range of Operating Specifications:

Wavelength Temperature Watt Density Voltage
Medium to Long 1500°F to 600°F 0.5 kW/ft2 to 2 kW/ft2 115 VAC to 575 VAC
2.5 µ to 4 µ 815°C to 315°C 0.5 W/cm2 to 2 W/cm2 50 Hertz or 60 Hertz

 

 

Series 36 Heater Specifications
Base Model No. Width Length Thickness Voltage(s)
3612 12 12 4 115
3624 24 12 4 115/208/230
3636 36 12 4 208/230/460
3648 48 12 4 208/230/460
3660 60 12 4 208/230/460/575
3672 72 12 4 208/230/460

Typical Design Watt Density = 500 to 1000 W/ft2

 

back to top ^

 

Series 37 Heater Specifications
Base Model No. Width Length Thickness Voltage(s)
3724 24 12 6 115/208/230
3736 36 12 6 208/230
3748 48 12 6 208/230/460
3760 60 12 6 208/230/460/575
3772 72 12 6 208/230/460

Typical Design Watt Density = 1000 to 1250 W/ft2

 

back to top ^

 

Series 38 Heater Specifications
Base Model No. Width Length Thickness Voltage(s)
380624 24 6 6 115
3824 24 12 6 208/230
380630 30 6 6 115
3830 30 12 6 208/230
380636 36 6 6 115
3836 36 12 6 208/230
3842 42 12 6 230/460
380648 48 6 6 208/230
3848 48 12 6 208/230/460/575
380660 60 6 6 208/230/287
3860 60 12 6 230/460/575
380672 72 6 6 208/230/287
3872 72 12 6 230/460/575

Typical Design Watt Density = 1200 to 2000 W/ft2

 

back to top ^

 

Series 39 Heater Specification
Base Model No. Width Length Thickness Voltage(s)
3912 12 12 2.5 115
3924 24 12 2.5 115/208/230
3936 36 12 2.5 208/230/460
3948 48 12 2.5 208/230/460
3960 60 12 2.5 208/230/460/575
3972 72 12 2.5 208/230/460

Typical Design Watt Density = 500 to 1000 W/ft2

 

back to top ^